You're viewing: Home>>  Molybdenum Rods and Bars                                                                                                     

                                        Molybdenum Rods and Bars                                           

Molybdenum products have the properties of high melting point, good thermal conductivity and low thermal expansion. At high temperature, they can resist oxidation and have high strength without any distortion during the procession, etc.

Molybdenum rod is manufactured as random length pieces or cut to customers' desired lengths.  In addition, there are three different surface processes or finishes which are provided, depending on the desired end use of the molybdenum rod.

FOTMA produces pure and lanthanated doped molybdenum rod. The lanthanated doped molybdenum rods are targeted for use in higher temperature applications where ductility is retained after recrystallization for material with smaller cross sections

Appearance: Divided forging molybdenum rod  and polished molybdenum rod; forging molybdenum rod surface is allowed to have oxidize film and slight forging hammer mark; polished molybdenum rod surface presents metallic luster and has no oxidized phenomenon notably; The two surfaces have no defects, such as divided   layer, crackle, burr and  vertical   crackle, etc.

Purity: Mo 99.95%

Specification: Dia. (0.8-16) x L (mm). The diameter and length deviation are consulted by both parties according to GB4188-84 standard or user s demand

Applications: Used for making electric vacuum device and electric light source parts

More detail can be find from Moly Square Bar, Plate, Round Bar & Rod